About Epoxy Tile Joint Grout
Tile joint filler is a premium-grade, fine, water-resistant cement-based powder used for grouting glazed wall tiles, mosaics, vitrified and fully vitrified tiles, ceramic floor tiles, industrial floor tiles, and similar surfaces. It is ideal for applications where chemical resistance is a key requirement, in which case our (Epoxy Tile Joint Grout) is recommended.
This high-performance filler ensures long-lasting durability and provides a smooth, professional finish for both residential and commercial installations. Its superior bonding capabilities make it suitable for high-traffic areas and spaces exposed to moisture, such as kitchens, bathrooms, and swimming pools. The grout is easy to apply and clean, offering excellent resistance to stains, dirt, and discoloration over time. With its water-resistant properties, it helps maintain the integrity of tile installations, even in harsh conditions. For areas requiring enhanced chemical resistance, our Epoxy Tile Joint Grout is the ideal choice, ensuring a reliable and high-quality result.
- ADVANTAGES OF Epoxy tile joint grout
- Produced in accordance with the BSI Quality Assurance program IS9001
- Ideal for both dry and wet areas, including swimming pools
- Extremely fine texture
- Non-shrinking and resistant to cracking
- Fungus-resistant and prevents the growth of fungi
- Durable with excellent abrasion resistance
- Strong bond strength
- Water-resistant
- Designed with inherent flexibility to accommodate forces caused by tile expansion and contraction
- Available in the following colors:
White Ivory, Pink, Terracotta, Grey, Copper Brown, Black, Blue, and more.
Surface Preparation
Before starting the grouting process, the adhesive bed must be fully set. Install tiles in a solid adhesive layer, ensuring that, as much as possible, there are no voids left underneath or behind the tiles. Protect exposed joints from dirt and make sure they are clean, dry, and free of loose debris before grouting. Do not apply in damp conditions.
MIXING
Combine the ADHERE BONDS-CTG with clean water until a smooth, lump-free paste of consistent color is formed. If using an electric drill mixer, mix at a slow speed (below 300 rpm). Avoid incorporating air by mixing too quickly or excessively. Do not re-mix the grout by adding additional water, as this will weaken the final strength.